dimensions are in millimeters (inches) www.fcai.fujitsu.com specifcations subject to change n features the 700 series connector has a superior ejector with a unique fexible latch. terminals are palladium plated and have an excellent cost performance ratio. the solder dip section is a 0.5 mm (0.020 in.) square and can be used in a 0.8 mm (0.031 in.) through hole. special strain relief prevents breakage. two kinds of keys and bump polarization prevent incorrect insertion. connectors with 4 mm (0.157 in.) long tails are also available for mounting on multilayer pc boards. n specif ications item operating temperature range current rating voltage rating contact resistance insulation resistance dielectric strength insertion force withdrawal force applicable wire applicable wire-wrapping wire applicable pc board (standard) specifcation C55c to +105c dc 1 a ac 250 v 120 m ? max. (dc 6 v, 0.1 a) 1000 m ? min. (dc 500 v) ac 500 v for 1 minute 3.5 kg max. (10 pins), 21 kg max. (60 pins) 0.25 kg min. (10 pins), 2.5 kg min. (60 pins) flat cable: 1.27 mm (0.050 in.) pitch awg #28 (stranded wires) or awg #30 (solid wire) awg #26 to #30 (solid wire) 1.6 mm (0.062 in.) for standard terminal, 3.2 mm (0.125 in.) for long tail n materials materials polyester (ul94v-0) copper alloy contact terminal gold palladium item insulating material conductor plating pc board connectors 00 series
700 series dimensions are in millimeters (inches) www.fcai.fujitsu.com specifcations subject to change socket n di mensions unit: mm (in.) n conf iguration by the number of pins n p art numbers number of contacts 10 14 16 20 26 30 34 40 50 60 t ype confguration n di mensions number of contacts 10 14 16 20 26 30 34 40 50 60 dimensions: mm (in.) a 32.0 (1.25) 37.1 (1.46) 39.6 (1.56) 44.7 (1.76) 52.3 (2.06) 57.4 (2.26) 62.5 (2.46) 70.1 (2.76) 82.8 (3.26) 95.5 (3.76) b 21.8 (.858) 26.9 (1.06) 29.4 (1.16) 34.5 (1.36) 42.2 (1.66) 47.2 (1.86) 52.3 (2.06) 59.9 (2.36) 72.6 (2.86) 85.3 (3.36) c 27.9 (1.10) 33.0 (1.30) 35.5 (1.40) 40.6 (1.60) 48.3 (1.90) 53.3 (2.10) 58.4 (2.30) 66.0 (2.60) 78.7 (3.10) 91.4 (3.60) d 10.16 (0.400) 15.24 (0.600) 17.78 (0.700) 22.86 (0.900) 30.48 (1.20) 35.56 (1.40) 40.64 (1.60) 48.26 (1.90) 60.96 (2.40) 73.66 (2.90) e 18.3 (0.720) 23.4 (0.921) 25.9 (1.02) 31.0 (1.22) 38.6 (1.52) 43.7 (1.72) 48.8 (1.92) 56.4 (2.22) 69.0 (2.72) 81.8 (3.22) f 32.3 (1.27) 37.4 (1.47) 39.9 (1.57) 45.0 (1.77) 52.6 (2.07) 57.7 (2.27) 62.8 (2.47) 70.4 (2.77) 83.0 (3.26) 95.8 (3.77) f 26.3 (1.04) 31.4 (1.24) 33.9 (1.33) 39.0 (1.54) 46.6 (1.83) 51.7 (2.04) 56.8 (2.24) 64.4 (2.54) 77.0 (3.03) 89.8 (3.33) g 17.3 (0.681) 22.4 (0.881) 24.9 (0.980) 30.0 (1.18) 37.6 (1.48) 42.7 (1.68) 47.8 (1.88) 55.4 (2.18) 68.1 (2.68) 80.8 (3.18) h 11.43 (0.450) 16.51 (0.650) 19.05 (0.750) 24.13 (0.950) 31.75 (1.25) 36.83 (1.45) 41.91 (1.65) 49.53 (1.95) 62.23 (2.45) 74.93 (2.95) through type fcn-707j010-au/0 fcn-707j014-au/0 fcn-707j016-au/0 fcn-707j020-au/0 fcn-707j026-au/0 fcn-707j030-au/0 fcn-707j034-au/0 fcn-707j040-au/0 fcn-707j050-au/0 fcn-707j060-au/0 end type fcn-707j010-au/b fcn-707j014-au/b fcn-707j016-au/b fcn-707j020-au/b fcn-707j026-au/b fcn-707j030-au/b fcn-707j034-au/b fcn-707j040-au/b fcn-707j050-au/b fcn-707j060-au/b through type fcn-707b010-au/0 fcn-707b014-au/0 fcn-707b016-au/0 fcn-707b020-au/0 fcn-707b026-au/0 fcn-707b030-au/0 fcn-707b034-au/0 fcn-707b040-au/0 fcn-707b050-au/0 fcn-707b060-au/0 end type fcn-707b010-au/b fcn-707b014-au/b fcn-707b016-au/b fcn-707b020-au/b fcn-707b026-au/b fcn-707b030-au/b fcn-707b034-au/b fcn-707b040-au/b fcn-707b050-au/b fcn-707b060-au/b bump type clip type 30 23 21 17 14 12 11 9 7 6 min. purchase lot quality
700 series dimensions are in millimeters (inches) www.fcai.fujitsu.com specifcations subject to change idc header m6 series n di mensions unit: mm (in.) n p art numbers and dimensions number of contacts 10 14 16 20 26 30 34 40 50 60 without mini latch fcn-707p010-au/0 fcn-707p014-au/0 fcn-707p016-au/0 fcn-707p020-au/0 fcn-707p026-au/0 fcn-707p030-au/0 fcn-707p034-au/0 fcn-707p040-au/0 fcn-707p050-au/0 fcn-707p060-au/0 dimensions: mm (in.) a 32.0 (1.25) 37.1 (1.46) 39.62 (1.56) 44.7 (1.76) 52.32 (2.06) 57.4 (2.26) 62.48 (2.46) 70.1 (2.76) 82.8 (3.26) 95.5 (3.76) b 26.80 (1.06) 31.90 (1.26) 34.42 (1.36) 39.50 (1.56) 47.12 (1.86) 52.20 (2.06) 57.28 (2.26) 64.90 (2.56) 77.60 (3.06) 90.30 (3.56) c 18.3 (.720) 23.4 (.921) 25.9 (1.02) 31.0 (1.22) 38.6 (1.52) 43.7 (1.72) 48.8 (1.92) 56.4 (2.22) 69.1 (2.72) 81.8 (3.22) d 10.16 (.400) 15.24 (.600) 17.78 (.700) 22.86 (.900) 30.48 (1.20) 35.56 (1.40) 40.64 (1.60) 48.26 (1.90) 60.96 (2.40) 73.66 (2.90) e 11.43 (.450) 16.51 (.650) 19.05 (.750) 24.13 (.950) 31.75 (1.25) 36.83 (1.45) 41.91 (1.65) 49.53 (1.95) 62.23 (2.45) 74.93 (2.95) f 13.43 (.528) 18.53 (.729) 21.03 (.828) 26.13 (1.03) 33.73 (1.33) 38.83 (1.53) 43.93 (1.73) 51.53 (2.03) 64.23 (2.53) 76.93 (3.03) j 20.2 (.795) 25.3 (.996) 27.8 (1.09) 32.9 (1.29) 40.5 (1.59) 45.6 (1.79) 50.7 (2.00) 58.3 (2.29) 71.0 (2.79) 83.7 (3.29) with mini latch fcn-707p010-au/m6 fcn-707p014-au/m6 fcn-707p016-au/m6 fcn-707p020-au/m6 fcn-707p026-au/m6 fcn-707p030-au/m6 fcn-707p034-au/m6 fcn-707p040-au/m6 fcn-707p050-au/m6 fcn-707p060-au/m6 h 18.3 (.720) 23.4 (.921) 25.9 (1.02) 31.0 (1.22) 38.6 (1.52) 43.7 (1.72) 48.8 (1.92) 56.4 (2.22) 69.1 (2.72) 81.8 (3.22) g 13.43 (.528) 18.53 (.729) 21.03 (.828) 26.13 (1.03) 33.73 (1.33) 38.83 (1.53) 43.93 (1.73) 51.53 (2.03) 64.23 (2.53) 76.93 (3.03) fcn-707p0xx-au/xx series - discontinued
10 700 series dimensions are in millimeters (inches) www.fcai.fujitsu.com specifcations subject to change through hole socket n di mensions unit: mm (in.) n p art numbers and dimensions number of contacts 10 14 16 20 26 30 34 40 50 60 part number fcn-704j010-au/0 fcn-704j014-au/0 fcn-704j016-au/0 fcn-704j020-au/0 fcn-704j026-au/0 fcn-704j030-au/0 fcn-704j034-au/0 fcn-704j040-au/0 fcn-704j050-au/0 fcn-704j060-au/0 a 10.16 (0.400) 15.24 (0.600) 17.78 (0.700) 22.86 (0.900) 30.48 (1.20) 35.56 (1.40) 40.64 (1.60) 48.26 (1.90) 60.96 (2.40) 73.66 (2.90) dimensions: mm (in.) b 17.3 (0.681) 22.4 (0.881) 24.9 (0.980) 30.0 (1.18) 37.6 (1.48) 42.7 (1.68) 47.8 (1.88) 55.4 (2.18) 68.1 (2.68) 80.8 (3.18)
11 700 series dimensions are in millimeters (inches) www.fcai.fujitsu.com specifcations subject to change accessories (polarizing key, lock spring) n di mensions unit: mm (in.) unit: mm (in.) n specif ication of polarity to prevent incorrect insertion ? specify polarity as follows: notes: ? see the next page for cable termination. ? see the next page for idc tools. ? the last digit (0) of the part number is zero. ? use tapping screws jis b1122, 2.5x6 to mount a straight connector on pc boards. ? socket (pin type) fcn-707j050-au/b # basic part number common pin number with pin polarity example 04: fcn-700a1 plugged into pin 4 note: the specifcation method is the same for idc plugs and through hole sockets. s s
12 700 series dimensions are in millimeters (inches) www.fcai.fujitsu.com specifcations subject to change idc tools n features ? special idc tools are used to assemble fcn-700 series connectors and fat cables. ? all tools are simple and easy to use, even for frst- time users. ? users who have idc tools manufactured by us do not have to buy hand presses or cutting cables. they are compatible. please buy the locator plate designed for your connectors. ? the number of pins can be changed easily by setting the connector guide to a specifed pin hole. ? the cable cutter remains sharp, giving fast, easy cutting with a long life. notes: ? please ask for an operation instruction manual if needed. ? if you have any questions about fujitsu idc tools, please contact your local fujitsu offce or your local fujitsu distributor. hand press cable cutter locator plate n cable term ination ? flat cable termination diagram there are many ways to connect connectors to fat cables. choose the best connection method for your application from the fgure below. the orientation of a connector is important when you specify polarity to prevent incorrect insertion of 700 series clip types. discrete wire insulation displacement connection is possible, but cable assembly is not simple. please contact us for details. ? cable length the length of a cable is indicated in units of cm, as shown in the fgure below. the minimum length is 3 cm. the specifed tolerance of the cable length is 10% for l 10 cm (5 mm min.), 1 cm for 10 cm < l < 100 cm, (l/100 cm + 2 cm) for 100 cm l 1800 cm, and 20 cm for 1800 cm < l. type number connector model 700 series 707p series no. 2 no. 1 no. 3 no. 4 n p art numbers for idc tools name cable cutter (common) hand press (common) locator plate 700 series socket locator plate 700 series plug (for 707p series) locator plate 700 series plug (for 707p series m6 type) part number fcn-707t-t001/h fcn-707t-t101/h fcn-707t-t022/h fcn-707t-t025/h fcn-707t-t036/h the hand press and the cable cutter can be used for other idc connectors.
13 700 series dimensions are in millimeters (inches) www.fcai.fujitsu.com specifcations subject to change japan fujitsu component limited gotanda-chuo building 3-5, higashigotanda 2-chome, shinagawa-ku tokyo 141, japan tel: (81-3) 5449-7010 fax: (81-3) 5449-2626 email: promothq@ft.ed.fujitsu.com web: www.fcl.fujitsu.com north and south america fujitsu components america, inc. 250 e. caribbean drive sunnyvale, ca 94089 u.s.a. tel: (1-408) 745-4900 fax: (1-408) 745-4970 email: components@us.fujitsu.com web: http://www.fujitsu.com/us/services/edevices/components/ europe fujitsu components europe b.v. diamantlaan 25 2132 wv hoofddorp netherlands tel: (31-23) 5560910 fax: (31-23) 5560950 email: info@fceu.fujitsu.com web: emea.fujitsu.com/components/ asia pacifc fujitsu components asia ltd. 102e pasir panjang road #01-01 citilink warehouse complex singapore 118529 tel: (65) 6375-8560 fax: (65) 6273-3021 email: fcal@fcal.fujitsu.com web: http://www.fujitsu.com/sg/services/micro/components/ fujitsu components international headquarter offces ?2010 fujitsu components america, inc. all rights reserved. all trademarks or registered trademarks are the property of their respective owners. fujitsu components america or its affliates do not warrant that the content of datasheet is error free. in a continuing effort to improve our products fujitsu components america, inc. or its affliates reserve the right to change specifcations/datasheets without prior notice. rev. january 20, 2010.
|
